Easy IPod Touch Charger Dock

Materials- 7 2x2 thick blocks 1 2x4 thick block 2 1x6 thick blocks 1 1x12 thin block 2 2x4 rounded thick block 2 2x6 thin blocks 2 2x4 thick slanted blocks 1 2x6 thick block Supplies- IPod Charger Optional- 2 1x1 dot piece

First you want to get the 8x8 thin piece and snap on the 2 2x2 pieces in the front like so.

Add the 2x6 piece on top of the two 2x2 pieces with the rounded 2x8 piece.

Snap on the four 2x2 blocks on the edge like so add the slanted ones on top of them

Add the 2x6 block at the back of the contraption, then add the two 2x4 blocks on top. Last put the rounded piece on top.

Get the rest of the pieces except the 1x12 piece and place them on the front like in the pictures for balance.

Turn the contraption on its side like in the pictures insert the charger into the little slot like shown in the pictures.

Last of all add your iPod on the dock, it's ready to charge, play music or just sit there