Easy IPod Stand
Make a really easy, portable iPod stand for watching movies and videos.
Materials
Scissors
Thin card - eg. from cereal boxes
Glue - I use Evo Stick Impact glue, but a glue stick or UHU should work fine.
Newspaper - To stop glue from going on surfaces if using Evo Stick or UHU.
2l drinks bottle - Optional
Thin card - eg. from cereal boxes
Glue - I use Evo Stick Impact glue, but a glue stick or UHU should work fine.
Newspaper - To stop glue from going on surfaces if using Evo Stick or UHU.
2l drinks bottle - Optional
Template
Print off this template:
It should measure 11.6cm along the bottom and 5.7cm from top to bottom
UPDATE: Also try drawing the template onto a 2l drinks bottle - it is ready curved and is transparent, very cool.
It should measure 11.6cm along the bottom and 5.7cm from top to bottom
UPDATE: Also try drawing the template onto a 2l drinks bottle - it is ready curved and is transparent, very cool.
Assembly
Draw around the template onto some card and cut out. you will need two. Then you need to stick them together and wait for them to dry. The laminating effect of two pieces gives it more strength. Read the instructions on Evo Stick if using that.
Done!
Just gently bend the card into a semi-circle shape and your done!