Easy Science Fair Project

by randofo in Workshop > Science

31548 Views, 229 Favorites, 0 Comments

Easy Science Fair Project

PHLargeFile.gif

Making a PH reactive liquid is an easy science fair project that could be made in a single evening with great results. This project requires little more than red cabbage and some basic household supplies. This project is an easy way to visually determine if a liquid or powder is an acid or a base. With the plurality of liquids and powders in your household, this allows for vast experimentation.

Materials

01.jpg

There are few required materials for this project.

The first and most important item is red cabbage. One large cabbage will yeild more PH liquid than is necessary, so it is probably best to cut it in half (or get a very small cabbage).

Also, a standard coffee filter is recommended.

Chop It Up

02.jpg
03.jpg
04.jpg

Chop one of the halves of the cabbage into little pieces. Put these pieces in a bowl.

Add Boiling Water

06.jpg
05.jpg
07.jpg

Boil a few cups of water, and then pour it into the bowl until the cabbage is fully saturated and the water level reaches the top.

Wait

08.jpg
09.jpg

Wait for the water to cool down to room temperature. Notice that the liquid will grow increasingly dark purple.

Pour the Liquid

10.jpg
11.jpg
12.jpg
13.jpg

Pour the liquid into a jar or plastic container.

It is recommended to pour the liquid through a coffee filter to keep bits of cabbage out of the final liquid.

Prepare

14.jpg
15.jpg

Pour a small amount of the liquid into a wide-mouthed secondary container.

Experiment

17.jpg

You can now test where different liquids and powder to determine if they are an acid or base.

Acidic items will turn the liquid red.

Bases will turn the liquid green.

The more pronouned the color, the more further the chemical being tested is from being neutral.

Use new PH indicator liquid for every test and never mix acids and bases together because the chemical reaction they create can potentially be dangerous.

DIY Litmus Paper

16.jpg
18.jpg
19.jpg

This solution can also be used to make litmus paper.

All you need is some white acid-free drawing paper.

Cut the paper into small strips and then dip the strips into the solution. They are now ready to be used to test where a chemical falls on the pH scale.

Just like in liquid form, red indicates an acid and green indicates a base. Blue is neutral.