Easy Safety Glasses Storage

I needed a simple and easy way to keep my safety glasses organized, this is it.

I used a basic wire coat hanger

I left about 3 inches of wire past the bottom bend on each side.

I straightened the slight kink in the wire and bent the remaining portion to form an 90 degree angle on both sides. The result is something that looks like a very skinny towel bar.

I gave myself 1.5" of reveal.

I held the wire against the shelf for a rough measurement, then determined that the wire was 3/32".

Grab a drill and poke two holes into the face of the shelf deep enough for the remaining wire.

Safety glasses are light, so I'm not worried about it collapsing.

It took me more time to write this than it did to do the project!