Easy Red Laser (That Burns) for Under $40

by sircowsox in Circuits > Lasers

10965 Views, 80 Favorites, 0 Comments

Easy Red Laser (That Burns) for Under $40

IMG_0054.JPG
Red lasers are sweet. You can go ahead and buy a laser but those can be expensive and not always be as effective. In this instructable I'll show you how to build your very own red burning laser for under $40. The process and Idea came from this video.http://www.youtube.com/watch?v=_VrNDe9mpOs

Parts

ldpressedaixiz2.gif
md_v3.jpg
batt.jpg
Supplies:

1. Laser Diode- can be purchased for $20 on this site.
http://hightechdealz.com/product_info.php?cPath=21&products_id=36

2. Laser Drive- Can be purchased on this site for $13.
http://rkcstr.nfshost.com/index.php?main_page=product_info&cPath=65&products_id=201

3. 4 AA battery pack. Can be bought at Radio Shack for about $2.
http://www.radioshack.com/product/index.jsp?productId=2062253

4. Some type of insulation. I ruined my first one by letting it overheat.

Tools:

1. Safety Glasses

2. Soldering Iron

3. Solder

4. 4 AA batteries

Soldering

pinsud6.jpg
IMG_0049.JPG
1. First find the positive and the negative ends of the diode and solder them to the front end of the driver.

Step 2

Screen shot 2011-03-09 at 1.29.12 PM.png
Next Soldier the two ends of the battery pack to the other ends of the driver.

Step 3

IMG_0046.JPG
Now turn the screw on the driver all the way to the right. Make sure you don't overturn and break it. This will increase the power output.

All Done

IMG_0051.JPG
IMG_0055.JPG
IMG_0054.JPG
That's it. You can add some insulation so that it doesn't overheat. My first one burnt out because I left it on too long with no insulation. Now you can focus the beam and it will light matches, fireworks and make most black paper and rubber melt. Make sure you use appropriate glasses and safety precautions. just by looking at the reflection hurts your eyes and gives you a headache. Remember always be cautious.