Easy Origami Decorative Star Design for All Ages
919 Views, 15 Favorites, 0 Comments
Easy Origami Decorative Star Design for All Ages
.jpeg)
Are you looking for a fun and easy papercraft that you can do quickly? How about one that you can teach to kids, teens, or adults? Or do you want something that you can do with any 4 pieces of rectangular paper? Well, you have come to the right place! In 15 minutes or less, learn how to make a beautiful star decoration with this Instructable!
All you need to make this craft is four (4) pieces of paper (I chose regular printer paper).
What are you waiting for? Go try the craft!
If you have any questions or comments, don't hesitate to put them in the comments.
Supplies
~ four (4) pieces of rectangular paper
Fold the Paper As Shown Until It Is 16x8
.jpeg)
.jpeg)
.jpg)
Refold on the Existing Creases As Shown
Repeat the Previous Steps on the Second Piece of Paper. You Should Now Have 2 Identically Folded Strips of Paper, As Shown.
.jpeg)
Connect the Strips of Paper at Both Ends As Shown. You Should Now Have a Large Star As Shown in the Last Picture.
Warp the Large Star As Shown Until It Appears More Circle-like Than Star-like.
Repeat Steps 1-2 With Your 3rd Piece of Paper. You Now Have a Strip Like You Had in Step 3. Connect One End of the Strip With the Other End of the Same Strip As Shown. This Creates a Star (kind of Like a Smaller Version of the One in Step 4).
Put the Large Star From Step 4 INSIDE THE SMALL STAR From Step 6, As Shown. Warp the Large, Inner Star Like You Did Earlier in Step 5, As Shown.
Do Step 6 Again With Your 4th Piece of Paper. NOTE: THIS PIECE SHOULD BE 16x16, NOT 16x8. You Should End Up With a Star the Same Size As the Last One, Just Thinner, As Shown.
Insert the Thin Star to BACK of the Stars From Step 7. Flip the Star Back Over As Shown and You Are Almost Done!
Lightly Press on the Inner Star, and You Are Done! Great Job!
