Easy Guitar Pick Dispenser

Very simple and effective 3d printed pick dispenser!

Download these STL files and 3d Print each piece

The pieces will most likely have excess or rough plastic. Trim the excess off so the pieces look nice and clean.

1. Grab a paper towel and pour a little acetone on to the paper towel
2. Wrap up the pieces in this paper towel
3. Let sit for an hour or so to smooth the plastic

1. Grab a basic spring from an old pen
2. Cut spring in half
3. Hot glue to base of holder and platform

Hot glue the top onto the holder and you are good to go!