Easy Glider

by MEB and OJB in Living > Office Supply Hacks

5104 Views, 15 Favorites, 0 Comments

Easy Glider

13, 4:56 PM.jpg
This instructable will tell you how to make an easy household item Glider btw this is OJB again on my 3rd instructable.



Fly High! And Enjoy!





(I suggest throwing this in an open area throw it like a paper airplane from the section in between the first set of wings and the tail)

Materials

13, 5:50 PM.jpg
1.scissors

2.any type of straw

3.foam plate

4. Tape

5.paperclip (optional but recommended)

Body of the Plane

13, 5:50 PM.jpg
Get your straw

Cutting the Foam Plate

13, 5:50 PM.jpg
Cut the plate so it looks like the pic

Cutting Off the Sides

13, 5:50 PM.jpg
Cut where I marked the foam with a pen

Picture

13, 5:50 PM.jpg
It should look like this or similar

Attaching

13, 5:50 PM.jpg
Center the straw in the middle of the foam thing you just made. And attach with tape so it looks like the picture

Tail

13, 5:50 PM.jpg
Now with your extra pieces of the plate choose on and make an ark sort of thing. So it looks like the pic

Attaching the Tail

13, 5:50 PM.jpg
Attach the tail the same way you attached the front set of wings.

Picture

13, 5:50 PM.jpg
13, 5:50 PM.jpg
You should get something like this.

Paperclip

13, 5:50 PM.jpg
Now crumple up that paperclip sort of so it is smaller.

Sliding

13, 5:50 PM.jpg
Now slide it into your glider so it looks like the pic

Throwing

13, 5:50 PM.jpg
Now it doesn't always throw well sometimes it doesn't fly well sometimes it does. You just need to be patient! Throw it like a paper airplane from the part I'm pointing at in the pic.