Easy Foam Throwing Hachet
by The dorklord11 in Craft > Costumes & Cosplay
194 Views, 0 Favorites, 0 Comments
Easy Foam Throwing Hachet
"it's easy"
Supplies
for this project you need e.v.a foam and a hot glue gun and scissors
Safety
be sure not to get burnt
Get Some Scraps
this should be relatively easy
Cut and Form
make a handle from a scrap like the first image
then make a piece like the second
be sure to cut of the bits on the edges
see the sixth image cut something like that and slice it in half
Glue
glue the strips to the handle don't cut anything off,
bend the strips so they are like the image at the end
Cut the Blade
make sure that you cut the back like in the picture
Glue the Head On
as you can see the hatchet head has been glued to the handle
Detialls
cut pieces like the ones in the ones in the image
and
glue
The END
congrats!!