Easy Drawstring Bag

by grecodude in Craft > Leather

273 Views, 1 Favorites, 0 Comments

Easy Drawstring Bag

IMG_20220716_134214[1].jpg
IMG_20220716_100905[1].jpg

This is a drawstring bag that can be made from just a scrap of leather and a few tools.

Supplies

IMG_20220716_081459[1].jpg

All you need is a large scrap of leather, preferably rectangular, a pair of scissors, a 3 mm leather hole puncher, a clear ruler, and a fabric marker or sharpie.

Drawing the Outline

IMG_20220716_081612[1].jpg
IMG_20220716_081728[1].jpg
IMG_20220716_081812[1].jpg
IMG_20220716_081941[1].jpg

Using the ruler and the sharpie, draw a 2" line at the top of the scrap, away from the edge. Then, draw a 5" line perpendicular to the 2" line. Then at the other end of the 5" line, draw a second 2" line parallel to the first. Connect them with another 5" line.

Cutting the Outline

IMG_20220716_082131[1].jpg
IMG_20220716_082338[1].jpg
IMG_20220716_082526[1].jpg
IMG_20220716_082636[1].jpg

Cut with the lines on the outside so they aren't on the small rectangle. Round the corners a bit. Once you've finished cutting it, fold it in half. Save the scrap for later.

Making the Holes

IMG_20220716_082804[1].jpg
IMG_20220716_083213_1[1].jpg
IMG_20220716_084839[1].jpg
IMG_20220716_085004[1].jpg
IMG_20220716_085243[1].jpg
IMG_20220716_085531[1].jpg
IMG_20220716_090043[1].jpg
IMG_20220716_090756[1].jpg
IMG_20220716_091007[1].jpg

With the fold down, draw 5 dots about half a centimeter apart. Then, with the leather hole puncher, punch the folded leather piece on BOTH layers. Next, Draw three more holes on the top of the rectangle. Punch these out with only ONE layer. Repeat on the other side.

Making the String

IMG_20220716_091418[1].jpg
IMG_20220716_091648[1].jpg
IMG_20220716_091818[1].jpg

Using the old scrap from step 2, cut a 10" straight strip about half a centimeter thick. Tie a knot at the thicker end, Then repeat with a second string.

Stringing the Bag

IMG_20220716_091922[1].jpg
IMG_20220716_092321[1].jpg
IMG_20220716_095132[1].jpg
IMG_20220716_095032[1].jpg
IMG_20220716_095214[1].jpg

Thread the rope through both layers at the hole closest to the fold. Use a whipstitch to stitch the five holes on that side. After the 5th hole, do a 6th whipstitch through only one layer. Then do a running stitch through the three holes on the top. Repeat on the other side.

Finishing Up

IMG_20220716_095541[1].jpg
IMG_20220716_095636[1].jpg
IMG_20220716_095741[1].jpg
IMG_20220716_131948[1].jpg

Cut off the excess string on both sides, leaving about an inch of space. Tie an overhand knot on each end. To close pull on both strings at the same time.