Easy DIY Stress Ball

by LiveCrafts in Living > Life Hacks

34309 Views, 259 Favorites, 0 Comments

Easy DIY Stress Ball

100_0562.JPG

These simple DIY stress balls are easy to make and fun to use!! They are great for people who are mad, tense, or for people with hand injuries, this ball could be used as a therapy. But, of course, this ball is mainly FOR FUN!!!

Materials:

-Flour

-3 balloons

-A condiment bottle

-Super Glue

-Scissors

Prepare the Flour

100_0564.JPG
100_0565.JPG
100_0566.JPG

Add the flour into your condiment bottle with a spoon. You can also use a funnel, if you have one. Fill your condiment bottle 3/4 of the way to the top, or if you are using a funnel, add in 3/4 of a cup.

Blow Up the Balloon

100_0567.JPG
100_0568.JPG

Now go ahead and blow up the balloon. Twist the end of the balloon 5-6 times to ensure security. Insert the end of the balloon onto the nozzle of the condiment bottle.

Squeeze the Flour In!!

100_0571.JPG

Now, turn the bottle upside down and let the end untwist. Now squeeze the flour into the balloon. Get all of the flour into the balloon (it should still be blown up) before removing the nozzle.

Slowly Let It Deflate

100_0572.JPG

Slowly let the balloon deflate, but be careful, it will spit out flour dust, so make sure you pinch the end!

Massage the Bottom of the Balloon

100_0573.JPG

Massage the bottom of the balloon to release any air bubbles. Now it shouldn't spit out any flour.

Cut Off the End of the Balloon

100_0574.JPG
100_0575.JPG

Cut off the end piece of the balloon.

Clean Off the Balloon

100_0576.JPG
100_0577.JPG

Wet a paper towel and remove flour dust from around the sides and on the bottom.

Cut the End Off of Another Balloon

100_0578.JPG
100_0579.JPG

Cut off the end piece of another balloon.

Place It on Top of the Ball

100_0580.JPG
100_0581.JPG
100_0582.JPG

Stretch the balloon out (all fingers should fit in it) and place it over the hole on the ball. Now no flour can escape.

Glue

100_0583.JPG
100_0584.JPG

Clue the edges of the second balloon down onto the first balloon. I recommend using Super Glue.

Add Another Layer

100_0585.JPG
100_0586.JPG
100_0587.JPG
100_0588.JPG

Repeat, and add a third layer. You do not need to glue this layer down, though.

YOU'RE DONE!!!!!