Easy DIY Steampunk USB

This is my first instructable so dont be so rought whit me :)) , And sorry for my bad english.

I used gears from an old mechanical watch a copper pipe,hot glue,a bright led, and quick glue .

Cut the copper pipe to the lenght of the usb stick.

After you cut the copper pipe now we can make the body,and the front and bottom piece.

The thing is the same like the body, just measure the usb lenght and cut, and solder . Just like the body.

After everything is ready and all are glued and set in place to be oxidized copper in the following way: a quarter cup of vinegar and two tablespoons of coarse salt, and applied with a soft brush or a toothbrush but not very much to result in an ugly black :))

PS. Sorry for my bad english i used google translate.