Easy DIY Paint Can Shaker. Never Shake Spray Paint Again!!!

Never shake spray paint again!!! In this video I show you the best and easiest way to shake a spray paint can by converting a commonly used power tool. I convert the reciprocating (sawzall) saw and a clamp into this magical devise. You may have seen other videos out there using a hand drill but this DOES NOT WORK! All it does is rotate the can, it doesn't actually shake it. This spray paint shaker actually SHAKES the can up and down, providing maximum ball movement.

You will need

1. 12" Clamp- https://amzn.to/31Lz11l
2. Reciprocating saw (cheapest one) - https://www.harborfreight.com/6-amp-variable-spee...

3. Reciprocating saw (the one I use) - https://amzn.to/3upJNGZ

4. Saw Blades (cheapest) - https://amzn.to/3upJNGZ

5. Nuts and bolts - You are on your own

Tape two reciprocating saw blades together to align properly for drilling. Drill two holes through both saw blades.

If your clamp has this little knob, grind it off, then line up the saw blades to the clamp base, and drill out the correlating holes.

place the clamp base between both saw blades. Insert bolt and secure with nuts. Grind off access bolt.

Test out to see if everything is secure. Attach paint can to clamp. Test it out!

Be sure to check out the in depth video (with some commentary)!!!!