Easy DIY Electronics Workspace

Hello instructables goers. today I will show you how to make a diy multipurpose workbench. I say multipurpose because I use it as a audio recording station and a tech workbench. I use mason jars and organizers bought from Home Depot to sort electronics and wires.

Pegboard I used some scrap pegboard I had laying around
Mason jars these can be purchased basically at any Walmart/target
Organizers you can use any pegboard organizers but I got mine from Home Depot
Hose clamps

Take the pegboard and screw it into the wall making sure there are studs where you are screwing it in. I also attached a lamp just above it you can use any lamp but make sure it has mounting holes.

Take a screw but not one that will go in the wall and screw the clamp into place with the appropriate slot. Then take the mason jar and put the clamp around the neck an tighten till the mason jar is secure.

Take the organizers and depending on the type just slide it through the hole and it will stay.

I used a cheap work desk for my actual workspace.

Thank you so much for your time and have fun organizing. Also comment on what you think or need help with I will try to help you with your problem. Don't forget to vote for me and have a nice day.