Easy College Beer Pong Table

We've all seen the stuff that college students throw out before summer- couches, mattresses, lamps, etc. If you happen to find a bookshelf and an ironing board, you can turn that junk into a solid beer pong table for your own apartment.

I put together two different tables through college, and I'll show you how to make your own.

Walk around the college apartments around May and June when students are moving out.

Find yourself these:

1. Ironing board
-Collapsible andn can be raised to table height

2. Bookshelf panel
- Standard BP table is 8' x 2', but as long as you can fit a row of 4 cups side by side on the width side you should be good. Take off one of the panels/boards of a bookshelf that looks like it would make a good table top

Buy these:

3. Wood screws
- screws that can just go into the board, size length is long enough to go into the shelf, but not too long as to penetrate all t

4. Washers
- sized for the screws, I used washers because I had extras lying around

1. Positioning - Place your ironing board centered on the bookshelf panel so that when the legs are extended, the cross section in directly underneath the center of the board.

2. Attaching - Screw in screws through the ironing board into the bookshelf panel, using a washer between the screw head and ironing board to better hold onto the board. Wood screws should go straight into the panel without needing to pre- drill any holes. Do this along the border of the ironing board to securely hold it in place.

As the

As the table is collapsible, it is easy to close to store, or open up to play. Flip over your new beer pong table, fix the height to a normal table or 28" for a standard BP table.

Crack open some beers, place your cups, and get some BP going.