Easy Build Grill Cart - DIY Guy
by LowesDIYGuy in Workshop > Woodworking
1667 Views, 28 Favorites, 0 Comments
Easy Build Grill Cart - DIY Guy

This week, we built a fast, easy, grill cart for the back deck.
The best part is, we built it using inexpensive, preassembled crates from Lowe's.
Also, we grilled burgers afterward, which is always good.
Watch the Video

This video gives an in-depth, step-by-step description of our build.
Anything you don't find here in the Instructable, you'll find in the video.
Gather Your Materials

You'll need the following:
(3) Wooden Crates
(1) 2-1/2"x 3-1/4" Pine Board
A board for the top (your choice ... pick something pretty)
(4) Casters
Minwax Polyshades Stain (Mission Oak)
Tools
Miter Saw
Jig Saw
Table Saw (or have Lowe's cut your top for you)
Drill/Driver
Some clamps are handy too.
Cut a Bunch of Blocks


Cut your pine board down to 3-1/2 inch blocks.
If you want to put a top on your cart like we did, you'll need 12 of these blocks
Prepare the Blocks



Drill two pilot holes in each block.
Set aside 4 blocks. These blocks will go on the top crate, and attach to the top.
For these 4, you'll also need to drill a pocket hole in the center.
That way, when you attach the top to the cart, the screws are hidden.
Attach the Blocks to the Crates


Glue and screw one in each corner.
Do this for all three crates.
Remember to put all the blocks with the pocket holes on the same crate.
Cut Some More Pine


Cut the rest of your pine board into two strips, 11-3/4" long.
Go ahead and mount these to the bottom crate with screws and glue.
This is what we'll use to attach the wheels for the cart.
Cut Out Some Slats




Measure 1-1/5" in from the sides of your crates, and cut out the top three slats on one side with a jig saw.
Cut Out a Top

We cut a board down to 15" x 20" for our top.
Stain Everything


There are a bunch of options for stain, but we used a simple spray-on stain with included protective finish.
Make sure to completely and evenly cover all surfaces.
Attach the Wheels



Drill holes for your wheels on the bottom crate. We used locking casters, but you can use whatever strikes your fancy.
Secure those suckers with locking nuts.
Make sure if you have locking wheels, you mount them both on the same side of the crate, otherwise they won't work.
Put Them All Together



Stack your crates and line them up.
The crate with the wheels goes on the bottom (obviously)...
and the crate with the pocket holes goes on the top.
Fasten these together with screws through the blocks we attached earlier. (Pre-drilled pilot holes help)
Attach the Top

Screw it on using the pocket holes you drilled earlier, and you're done.
Bask in the Glow of Your Own Handiness

Just look at that thing, classing up your deck like a champ. Even E-dub, the DIY Dog loves it!
Subscribe


If you found this Instructable helpful, we'd love it if you subscribed here, as well as over at our new DIY Guy YouTube Channel.
We'll release new episodes every Wednesday morning, as well as extra stuff throughout the week. And remember to turn on notifications at YouTube so you'll know each time we upload a new video. Thanks again!