Easy Bendy and the Ink Machine Costume for All Ages.

I made this easy costume since I know what it's like to not have a costume during Halloween. This is simple and most of the materials are easily obtainable.

A big piece of cardboard (enough for your head)

Thin sheet of black fabric that you can see through or stretched out black sock

Long strip of Velcro

Paint: Black

White paper

Black pen 

Hot glue

Scissors 

Draw a circle big enough for your face then draw the details of Bendy.

Cut out the head and eyes, if you want the mask to be sturdy then make another one.

Grab your hot glue then glue the pieces together and after that grab your thin sheet of black fabric (or use a stretch out piece of black sock since it is the same) which you'll glue it on the other side of the mask. Once you do all the steps it will look similar to this.

Find your long stirps of Velcro which you'll then hot glue them to the mask preferably as shown in the image. For extra support, hot glue thin carboard on top of where you glued the Velcro to secure it.

Paint the mask black as shown in the image provided, don't worry if you pass the line it is good if you do.

I did not have white paint so I improvised with white paper in which I traced the inner face of the character.

Next hot glue the inner face to the mask and if you want add some detail by using a pen to darken the smile and add a line under the eyes.

For his bow tie draw it, cut it, and again to make it sturdy make it again then hot glue it.

The last and final step is to trace the bow tie on white paper which you will glue it and add some details.

After that you have the finished product, enjoy and have fun trick or treating this Halloween.