Easy Assemble Computer Stand
by M00NW4LK3R in Workshop > 3D Design
46 Views, 0 Favorites, 0 Comments
Easy Assemble Computer Stand
![Screenshot 2024-05-16 9.12.51 AM.png](/proxy/?url=https://content.instructables.com/FZK/JKW4/LW99G8SU/FZKJKW4LW99G8SU.png&filename=Screenshot 2024-05-16 9.12.51 AM.png)
My computer is heating fast when I was using it. So I want to help ventilate the air under it so it won't be that hot.Normal tables absorbs and keeps all the heat inside.Also if I lift the computer above the table, I can store things under it.
Supplies
![Screenshot 2024-05-17 12.18.14 PM.png](/proxy/?url=https://content.instructables.com/FOU/V73J/LWAOW1W0/FOUV73JLWAOW1W0.png&filename=Screenshot 2024-05-17 12.18.14 PM.png)
![Screenshot 2024-05-17 12.17.57 PM.png](/proxy/?url=https://content.instructables.com/FAX/BNN7/LWAOW1W6/FAXBNN7LWAOW1W6.png&filename=Screenshot 2024-05-17 12.17.57 PM.png)
3d printer and my file, make sure your 3d printer is accurate enough, or we have to adjust the width and length of all plugs(like in the picture shown), because most 3d printers actually print the piece a little bigger than the file described.
Downloads
Print It
![Screenshot 2024-05-17 12.15.19 PM.png](/proxy/?url=https://content.instructables.com/FLZ/N8PZ/LWAOW1VO/FLZN8PZLWAOW1VO.png&filename=Screenshot 2024-05-17 12.15.19 PM.png)
print 2 of each plate(red and yellow), 4 cross structure(green ones) and two block with incline(black ones)
Assemble It
![Screenshot 2024-05-16 9.12.51 AM.png](/proxy/?url=https://content.instructables.com/FQK/BAXB/LW99G8KP/FQKBAXBLW99G8KP.png&filename=Screenshot 2024-05-16 9.12.51 AM.png)
assemble the hollow plate and the solid plate,then plug the two assembled plate together, then plug in the cross and the inclined block, the finished stand should seem like this
Glue the Connecting Part
use a glue gun to glue the connecting parts so the stand will be more stable.But you won't be able to disassemble it again.
Congratulation
![Screenshot 2024-05-20 10.18.06 AM.png](/proxy/?url=https://content.instructables.com/FOC/C18A/LWEZ7LLV/FOCC18ALWEZ7LLV.png&filename=Screenshot 2024-05-20 10.18.06 AM.png)
![Screenshot 2024-05-20 10.18.10 AM.png](/proxy/?url=https://content.instructables.com/FHS/PXHF/LWEZ7LM4/FHSPXHFLWEZ7LM4.png&filename=Screenshot 2024-05-20 10.18.10 AM.png)
your project is done now, now you can used this on your table and use it