Mouse Reuse for Students With Disabilities.
by olmanorozco in Circuits > Assistive Tech
503 Views, 2 Favorites, 0 Comments
Mouse Reuse for Students With Disabilities.
.png)
Example of an easy DIY mouse adapted for children with disabilities, for click games.
compatible with any type of commercial or home adaptive switch
Supplies
1- soldering iron and tin welding
2- 30 cm 2-way, flat cable.
3- 3.5 female jack.
4- Usb or wireless or bluetooth mouse.
6-screwdriver and scissors
 23.33.46.png)
 23.34.17.png)
 23.34.37.png)
we locate the screws and open the mouse, being careful not to move the pieces.
 23.38.02.png)
We locate the switch corresponding to the mouse click
 23.38.02.png)
 23.40.22.png)
 23.41.16.png)
 23.41.36.png)
 23.42.02.png)
We carefully separate the circuit board from the plastic casing.
Flipped the circuit board we will observe the legs of the switch that are soldered.
 23.47.32.png)
 23.47.50.png)
 23.48.34.png)
 23.48.51.png)
 23.49.20.png)
 23.49.37.png)
We soldered a wire to each of the 2 connection legs of the mouse click button switch
 23.55.44.png)
 23.56.35.png)
 23.56.55.png)
 23.57.35.png)
we solder the other end of the cable to the external branches of the Jack, as seen in the photo.
 23.58.05.png)
 23.58.17.png)
With the drill, we make a hole in the plastic casing, to place the jack.
 00.11.57.png)
 00.12.53.png)
 00.13.03.png)
 00.13.27.png)
 00.13.54.png)
 00.14.05.png)
 00.14.24.png)
 00.14.52.png)
 00.15.01.png)
Put the mouse parts back in place and close the mouse
.jpg)
.png)
We connect any adaptive switch that the disabled child has.