Easter Eggs That Glow and Change Color

by wannabemadsci in Living > Decorating

5504 Views, 33 Favorites, 0 Comments

Easter Eggs That Glow and Change Color

IMG_6730.JPG
IMG_6733.JPG
IMG_6738.JPG
IMG_6734.JPG

Easter Eggs that Glow and Change Color

Tired of using the same old plastic eggs for your Easter Egg Hunt year after year. Do something different and have an Easter Egg Hunt in the dark! This Instructable will show you how to make inexpensive color changing glowing plastic eggs.

Materials

IMG_6707.JPG
56f4b8fd4936d44b49000f23.jpeg
IMG_6755.JPG
IMG_6754.JPG

You will need:

1. Plastic Eggs (You can use what you have or buy new - White works best, but other colors will give interesting effects; I used 1-1/2 inch diameter [normal size] and 2 inch eggs. )

2. Color Changing Lights (I get these at the Dollar Store. The fake candles shown have a color changing LED in the base and a yellow flicker flame on top; they come with a coin cell battery - all for $1; amazing!)

3. Wire Cutters

Destroy the Candle; Keep the Base

IMG_6708.JPG
IMG_6709.JPG
IMG_6710.JPG
IMG_6713.JPG

We want to remove everything and just keep the base, which has the battery, battery holder, switch and color changing LED.

You can get into the insides of the candle by carefully crushing it (you might want to have gloves on to avoid any sharp plastic). Once the wall is broken you can peel off pieces until it is all removed. Cut off the wires leading from the base up to the flicker flame LED at the base.

You should end up with only the base left.

Cut Around the Switch and Battery Compartment

56f4b1ce50e1b6f7a6001045.jpeg
IMG_6724.JPG
IMG_6714.JPG
IMG_6717.JPG
IMG_6719.JPG
IMG_6720.JPG
IMG_6722.JPG
IMG_6723.JPG

Use the wire cutters to cut around the switch and battery compartment. The plastic is so cheap that if you take small 'bites' it just snaps off. Take care to wear eye protection. You could use a coping saw or a band saw if you have it but the cutters work fine.

You end up with an 'LED module', just the center portion of the base that contains the battery compartment, battery, switch and LED.

Drop the Remaining 'LED Module' Into an EGG to Light It Up!

IMG_6725.JPG
56f4c18e15be4d286a000892.jpeg
IMG_6727.JPG
IMG_6747.JPG
IMG_6740.JPG

Of course turn the LED on (you might have to pull a plastic tape). Then drop the LED assembly (what was left after removing the candle) into an Egg. Snap the Egg together and there you have it .... Glowing, Color Changing Easter Eggs!

Since the base is translucent white plastic and the inside of the eggs acts as a reflector the eggs light up pretty evenly!

Have an Easter Egg Hunt in the Dark

IMG_6735.JPG
IMG_6728.JPG
IMG_6730.JPG
IMG_6736.JPG
IMG_6729.JPG
IMG_6737.JPG

Now, while taking appropriate precautions to avoid tripping on something in the dark and killing someone, hide the Easter Eggs and let your little ones go searching in the dark for what the Easter Bunny Left!!!

[I don't necessarily recommend putting candy inside with the electronics; probably nasty things used in manufacturing, and candy casts a shadow - But perhaps the eggs could be 'traded in' for special goodies.]

Enjoy!