Easter Egg Basket Out of Newspaper.

by artpsychoblog in Craft > Art

916 Views, 1 Favorites, 0 Comments

Easter Egg Basket Out of Newspaper.

img_20170314_1730077.jpg
img_20170226_162115.jpg

REQUIREMENTS:

1)Newspaper cut in strips of 30-35cms x 10 cms
2) 2 circles of radius 4-5 cms cut out of black chart/card paper 3)PVA glue 4)scissors 5) broomstick /thin stick 6)acrylic paint of your choice

Make Tubes of Newspaper

wp-1489388553494-e1489392401755.jpg
img_20170226_132625.jpg

Start by rolling the newspapers into fine tubes. Start from one corner
and roll diagonally secure the tube at the end with glue.

Repeat

Make at least 25 of these tubes.

Create the Base

img_20170226_162824.jpg

On one of the circles stick using glue 9 tubes equally spaced to look like the pokes of a wheel.

Dry

Let it dry. (optional:use a clothes pin to secure the spokes during the process of drying.)

Fix the 2nd Circle

img_20170226_163058.jpg

Take the 2nd circle and stick it on top of the spokes such that both the
circles overlap perfectly.Keep a weight on it and set it aside to dry.

Secure the First Tube

img_20170226_163755.jpg

Take one of the other tubes and flatten it.
Take one end of the tube about 3cms and make a loop around one of the spokes ,such that it touches the circle. Secure it with glue.

Weave

img_20170226_202336.jpg
img_20170226_164319.jpg

Now lets begin to weave!Hold all the spokes vertically.
Alternately weave in and out of the 9 spokes and form the 1st layer. If there is more tubing remaining then form the 2nd layer.

Continue to Weave

Continue to weave till you get about 8 - 10 layers.
Secure the end with glue by looping it around a spoke.

Make the Handle

img_20170226_212713.jpg

Take the spoke which has the last tubing looped around it and the spoke bang opposite it to make the handle.
Trim the spokes to required length and insert the one end into the other.

Trim the Spokes

img_20170226_212925.jpg
img_20170226_213100.jpg

Take the remaining spokes and end them over either outwards or inwards in such away that the loop around the last layer.
Calculate the amount of spoke needed to trim such that you can tuck the ends of the spokes into 2 layers. Once trimmed tuck the ends into the 2 layers.

Decorate the Handle

img_20170226_221905.jpg
img_20170226_222004.jpg

You can leave the basket like this or can make the handle more fancy
by wrapping around another tubing around the handle and securing the ends with glue . Your basket should now look like this.

Paint

img_20170314_173007.jpg

Paint your basket with at least 2 coats of acrylic paint.

You can add a coat of transparent paint to give it a glossy finish.