Easter Egg 3D Paper Model, Colorable

This is a fun and easy Easter Egg made of paper!

This project is very fun to color and decorate before gluing it all together. If you are a crafty person or have kids to occupy for few hours, this is a fun way to create crafts together. (For younger kids that can't handle glue or scissors yet, allow them to do the coloring and then assemble it for them).

To start, download the template here

• Glue or double-sided tape
• Scissors
• Ruler
• Embossing stylus/bone folder/empty pen/blunt crafting knife
• 1 white cardstock paper: Letter 65-110lb or A4 100-300gsm

This projects measurements is based on Letter size paper. However, you can use any size paper from Letter, A3, or A4. The only difference is the size of your Egg when it's complete.

We recommend using Cardstock paper 65-110lb or 100-300gsm. This will give your Egg rigidity.

Download the pdf by following this link:  https://www.paperproject3d.com/easter-egg-project/

You can use any kinds of colors here from pencil crayons, ink, or markers.

Note: If you choose watercolor, allow it to dry under a book before moving to the next step.

For easy and accurate folding, use a tool with a pointy tip to create lines where folds occur.

Folds occur on dotted and dash dotted lines.

Carefully cut all solid lines.

When this model is complete, the lines (and your beautiful coloring) will be on the outside.

Add a small amount of glue on the tabs and connect it to the adjacent side. Hold for few seconds.

Alternatively, use double sided tape to connect the project together.

You are Done!

For more projects like this one visit https://www.paperproject3d.com/