EZ-EL Wire Glow in the Dark Shorts! Step-By-Step Tutorial

by ezelwire in Circuits > Wearables

1727 Views, 4 Favorites, 0 Comments

EZ-EL Wire Glow in the Dark Shorts! Step-By-Step Tutorial

Shorts_Finished2.png
Shorts_Finished.png
Here is a pair of shorts decked out with EZ-EL Wire! Have fun with it, be creative, and dazzle at the next party you attend!


If you like tutorials like this, get more inspiration at: https://ez-el.com/tutorials

Enter coupon code INSTshorts at checkout for a discount!


Materials:

Translucent Thread
Needle
25ft Purple EZ-EL wire
Wire cutter
Fabric chalk
Velcro

Design/Sew EZ-EL Wire

sew_elwire.png
You're more than welcome to follow our example in terms of design, but feel free to let your creativity flow with this project!

To start, place the inverter in the lining of the waist to be sewn inside the shorts so it can be hidden. After you do this, start sewing your el wire over the outline you design, and continue to sew until you are finished.  If the wire becomes difficult to bend at all with your designs, use a hair dryer to make it more malleable. However,  be careful to not use the hair dryer for too long on the wire, as it may cause damage to the wire.

Cut Excess Wire, and Enjoy!

Shorts_Finished.png
Shorts_Finished2.png
If you have any excess wire, snip it with a wire cutter, and enjoy your finished pair of EZ-EL Wire shorts!

If you enjoyed this tutorial, get more inspiration at: http://www.ez-el.com 

Enter coupon code INSTshorts at checkout for a discount!