EZ-EL Tron Motorcycle

by ezelwire in Circuits > Wearables

3268 Views, 24 Favorites, 0 Comments

EZ-EL Tron Motorcycle

TMotorcycle_Finished.jpeg
Already made the Tron Costume we posted earlier? Well here's how you can decorate a motorcycle to match it!

For more inspiration check out http://www.ez-el.com/tutorials

Enter coupon code INSTtroncycle at checkout for a discount!

Materials:
1. Wire cutters
2. 50ft of skyblue el wire
3. Rubber cement glue
4. Windex
5. Paper towel
6. Painters tape

Design

TMotorcycle_Step1.jpeg
Map out a design you would like on your bike, or follow the one in the picture.

Clean the Bike

TMotorcycle_Step2.jpeg
Spray the area where you'll be attaching the EZ-EL wire with windex and clean it thoroughly.

Apply Velcro to Bike and Battery Pack

TMotorcycle_Step3.jpeg
Place the velcro to the battery pack and apply. Then apply the adhesive to the inside of the bike area where it is not in the way of the bike handle hitting it.

Glue & Tape

TMotorcycle_Step4.jpeg
Next, apply Rubber Cement glue and move the EL wire along the imprint of the paint. Make sure you tape as you go. Remember to let the glue sit until the next day.

Remove Glue & Finished!

TMotorcycle_Finished.jpeg
Take all the tape off and clean up the glue residue around the EZ-EL wire (ie. use windex and cloth to wipe down). Enjoy your new ride!

Enter coupon code INSTtroncycle at checkout for a discount!