ESP8266 DS18B20 Temperature Node-RED MQTT

This time the integration of ESP8266 and the Node-RED platform was realized integrating a sensor DS18B20 of Protocol of Temperature Onewire.

From an HMI or SCADA Web creator on Node-Red-Dashboard using as base the MQTT Protocol and pubsubclient library converting the ESP8266 into MQTT Client.
Tutorial Complete:

Tutorial ESP8266 DS18B20 Temperature Node-RED MQTT (Mosquitto) IoT

Components and materials required for testing

1 ESP8266 01

1 ESP8266 03

1 ESP8266 12F

1 Diode leds

1 Resistors

1 Converter TTL -USB

1 Protoboard

Wires

1 Regulator LDV33CV 5 a 3.3V

1 Sensor DS18B20 Onewire

Note: To successfully complete this tutorial you must perform the following tutorials.
Previous tutorials Recommended

icstation.com

Tutorial 1 : Install Lubuntu (Ubuntu)

Tutorial 2 : Installation node red platform

Tutorial 3: Installation Node Red Dashboard

Tutorial 4: Installation Modbus TCP IP in Node Red

Tutorial 5: Installation of Mosquitto Broker MQTT in Lubuntu

Tutorial 6: Program ESP8266 con Arduino IDE

Tutorial 7: ESP8266 and Node-RED MQTT GPIO # 1

Test ESP8266 Temperature DS18B20 (Onewire) MQTT Node-Red IoT

According to the tests performed, the MQTT protocol is very fast,

allowing communication between Node-RED and ESP8266 to be almost in real time. From certain protocols we have tested, we consider and recommend implementing the MQTT for your IoT projects

Tutorial ESP8266 Temperature DS18B20 MQTT Node-Red IoT#6

More information and Downloads code on this project :

Tutorial ESP8266 DS18B20 Temperature Node-RED MQTT (Mosquitto) IoT

PDAControl English

PDAControl Español

Youtube Channel PDAControl