E-Z Catch

by CraigHarrison in Living > Pest Control

13753 Views, 31 Favorites, 0 Comments

E-Z Catch

Craigs 214.JPG
This Instructable shows how to make a bee catcher in minutes. This bee catcher ensures safety of the bees stinger, and efficiency. This is also considered re-using rather than recycling.
The E-Z Catch also make eating outside more fun and less harmful and annoying.

Supplies

Craigs 202.JPG
You will need a bottle ( Coke recommended ). Knife or scissors. Some coke, along with tape.

Preparing the Bottle

Craigs 210.JPG
Preparing the bottle is real easy. All you have to do is take of the label or raping of the bottle.

Making the Cut

Craigs 212.JPG
For step 3, you need to first make a line around the bottle where you are going to cut. Put the line about 1/3 around the top end. Then just cut the bottle.

The Flip and Tape

Craigs 213.JPG
After you cut the bottle and have two parts. You then take the top part of the bottle ( the drinking end ) and put it upside down into the bottom part. Once done you then tape it so the two parts hold together without taping over top of the bottle.

The Fill

Craigs 214.JPG
After you have tightly secured the two halves, you then just pour the Coke into the top end. Make sure you only fill the bottle up to about 1/6 to 1/7 full.