Duct Tape Card Board House and Hiding Place

by Anwesh mohanty in Living > Office Supply Hacks

569 Views, 3 Favorites, 0 Comments

Duct Tape Card Board House and Hiding Place

IMG_2220.JPG
IMG_2221.JPG
IMG_2222.JPG
IMG_2224.JPG
IMG_2223.JPG
IMG_2205.JPG

Hi,

This is my very first instructable. And what this is supposed to be is just a little project where you can hide some of your valuables and it completely made of scratch so it is very unlikely someone will look in it or just a house for play.

Materials

20150522_195552_HDR.jpg
20150522_195630_HDR.jpg

1.Duct Tape of your choice (i used grey and blue)

2.Wrapping paper(The ones you put on top of gift bags)

3.A ruler

4.A marker

5.A knife

6.Card board(i used a nutri bullet box but you can use anything)

Step 1

20150522_212343_HDR.jpg
20150522_213522_HDR.jpg
20150522_215254_HDR.jpg

First u need to make a base for the house and cover it with duct tape.

Step 2

20150522_225641_HDR.jpg
20150522_215640_HDR.jpg
20150522_220232_HDR.jpg

You need to make a wall and a window if u want. Cut it out.

Step 3

20150522_221036_HDR.jpg
20150522_223123_HDR.jpg
20150522_223129_HDR.jpg
20150522_223133_HDR.jpg

After that u need to surround the whole wall with duct tape and attach it to the base

Step 4

20150522_223705_HDR.jpg
20150522_224621_HDR.jpg
20150522_224938_HDR.jpg
20150522_224947_HDR.jpg

Next cut out a back wall that fits across the back just like in the picture. Cover it with duct tape and attach it to the window wall and to the bottom.

Step 5

20150522_225704_HDR.jpg
20150522_230354_HDR.jpg
20150522_230553_HDR.jpg

Next we have to make the next wall on the other side. Remember it is a bit longer than the other wall. Duct tape it to the back wall and the base.

Step 6

20150522_231100_HDR.jpg
20150522_231549_HDR.jpg

So we are going to start the front cut a piece out and make sure it fits on the window wall and the base perfectly.

Step 7

20150522_231803_HDR.jpg
20150522_231809_HDR.jpg
20150522_232315_HDR.jpg

Now we have to connect the part from our previous step with the wall and door. Duct tape all of it and connect it to the wall and the base.

Step 8

20150522_232310_HDR.jpg
20150522_232337_HDR.jpg
20150522_232341_HDR.jpg

Make the door just cover one piece of duct tape over and over again and then tape it to the frame we built.

Step 9

20150522_232738_HDR.jpg
20150522_233151_HDR.jpg

Once u attach the door cut out a L shaped piece so that we can finish the rest of the wall.

Step 10

20150522_234015_HDR.jpg

Cut out another piece like that and put it on so now you have half your front done.

Step 11

IMG_2186.JPG

Cut out a piece that is shaped like another L.

Step 12

IMG_2187.JPG

To finish the front of. You need to cut out a piece that fits the base.

Step 13

IMG_2191.JPG
IMG_2192.JPG

Trace your base again and cover it with duct tape. Place it right on top of the first level it should fit perfectly.

Step 14

IMG_2193.JPG
IMG_2194.JPG
IMG_2195.JPG
IMG_2201.JPG

cut out a piece for the front wall on the top. cut 2 windows out and put the wrapping paper. cover it with duct tape and put it on top of the second level it should be a little diagonal.

Step 15

IMG_2204.JPG
IMG_2206.JPG

Next trace the top of the house and put it on top of the house. Duct tape one side only. So that you can make it a top.

Step 16

IMG_2210.JPG

Last cover a piece of card board with duct tape so it can be the cover of the garage and once it is done only tape once side to the house so it is another storage compartment. Complete!!!