Duct Tape Wallet
Making a Slim Duct Tape Wallet
you need:
Duct Tape
Scissors
One Dollar
Credit Card or any type of card
Step 1
Cut off a piece of duct tape as long as a dollar bill or any bill
Step 2
Cut off another piece just about as long and over lap it on the first piece by just a little bit
Step 3
Get a third piece same length as the others
Step 4
And get another piece the same length and over lap it just like the first time
Step 5
put the 4 pieces together but DO NOT OVER LAP THEM make sure they are just touching then put a piece of tape connecting the 4 pieces
Step 6
Cover the entire back piece with tape
Step 7
trim off the edges and make it look nice
Step8
get two pieces that are half the length of one side
Step 9
put the pieces that you just cut half way under the edges like this
Step 10
the wallet should look like this so far
Step 11
for a credit card holder you can do a loop like this so there is the sticky part all of the way around and make sure a credit card can fit before you put it onto the wallet part
Step 12
make sure it is on one half of the wallet
Step 13
cover the sticky part with a normal piece so then the inside looks better and it wont stick to the other part of the wallet
Step 14 = FINISHED
here you have the finished wallet