Duct Tape Locker Keepers

![115_0299[1].jpg](/proxy/?url=https://content.instructables.com/FWD/OYIY/GR392Z8I/FWDOYIYGR392Z8I.jpg&filename=115_0299[1].jpg)
![115_0302[1].jpg](/proxy/?url=https://content.instructables.com/FJ8/R0QH/GQYG6HT6/FJ8R0QHGQYG6HT6.jpg&filename=115_0302[1].jpg)
![115_0303[1].jpg](/proxy/?url=https://content.instructables.com/F2F/ZYF9/GQYG6HT7/F2FZYF9GQYG6HT7.jpg&filename=115_0303[1].jpg)
![115_0304[1].jpg](/proxy/?url=https://content.instructables.com/FZ3/TBEW/GQYGLMBU/FZ3TBEWGQYGLMBU.jpg&filename=115_0304[1].jpg)











To complete all of these steps you will need:
Duct tape (1 or more colors)
Mirror (not bigger than 5 inches long)
Scissors
Duct tape (1 or more colors)
Mirror (not bigger than 5 inches long)
Scissors
Step 1
![115_0299[1].jpg](/proxy/?url=https://content.instructables.com/FWD/OYIY/GR392Z8I/FWDOYIYGR392Z8I.jpg&filename=115_0299[1].jpg)
Cut or tear a piece of duct tape that is long enough to have a centimeter hanging of each edge of the mirror and stick it on. Do this twice.
Step 2
![115_0303[1].jpg](/proxy/?url=https://content.instructables.com/F2F/ZYF9/GQYG6HT7/F2FZYF9GQYG6HT7.jpg&filename=115_0303[1].jpg)
![115_0302[1].jpg](/proxy/?url=https://content.instructables.com/FJ8/R0QH/GQYG6HT6/FJ8R0QHGQYG6HT6.jpg&filename=115_0302[1].jpg)
![115_0304[1].jpg](/proxy/?url=https://content.instructables.com/FZ3/TBEW/GQYGLMBU/FZ3TBEWGQYGLMBU.jpg&filename=115_0304[1].jpg)
Flip over the mirror. Now cut 2 more pieces the same size and put it on the back so it sticks to the front pieces. Cut excess on the ends off. I know this sounds hard but it is really simple!
Step 3

Now do the first to steps over on the sides of the mirror
Step 4

Now cover the back of the mirror.
Step 5



Now put 4 strips of duct tape connecting to the bottom. Do this twice to make a long sheet connected to the mirror.
Step 6



Now fold the sheet up to the bottom of the mirror creating a pocket. Then stick a piece of duct tape on each side to make it stay.
Step 7

If you want to make it magnetic add a magnet on the back. I like to cover the magnet up by adding a strip on top of it.
DECORATE!!! :)
![115_0072[1].jpg](/proxy/?url=https://content.instructables.com/FFB/4ATQ/GL4Z445P/FFB4ATQGL4Z445P.jpg&filename=115_0072[1].jpg)
Add different colors to decorate!!!!!!!!!!!!!!!!