Driven Sled

I think it's no secret that managing a sleigh is quite difficult, so i decided make them manageable, it can even drift on them.

1. Мetal
2. Angle grinder
3. Weld
4. Gloves
5. Glasses
6. Weld mask

1. Take plate of steel аround 15x10 cm
2. Spread diagonally on two right triangles

1. Cut diagonally on two right triangles
2. On shorter side cut the corner (on both parts)
3. Stripe frame for welding

1. Weld triangles to the frane (on both sides)
2. Weld bolt in the middle of triangle (on both sides)

1. We need two metal pipes(around 40cm)each
2. Recede 11 cm from the beginning and put a mark(both sides)
3. Also we need 2 short (1.5 cm) pices of pipe that can be bolted

• Weld on both sides

Install the levers in their place so that they were under bolts (for greater reliability).

Thank you for your interest in this project.

The test video will be coming soon.