Drinking Straw - Electronic Components Storage System

by kokpat in Workshop > Organizing

1669 Views, 18 Favorites, 0 Comments

Drinking Straw - Electronic Components Storage System

IMG_6510.JPG
IMG_6512.JPG
IMG_6513.JPG
IMG_6516.JPG
IMG_6519.JPG
For storage and carrying electronic components like LED, we can simply use drinking straw.

1. u need a drinking straw with large diameter such as drinking milk shake.
2. need to cut the straw into two parts, ie. shorter one as cap; longer one for storage.
3. for the longer one, u need to cut the mouth like the photo in order for easily insert the cap.
4. for the shorter one, u need to cut a small straight to allow in to "squeeze" into the loner one.
5. seal both of the straw with hot glue (not recommend to use sellotape), and use plier to make "toothpaste shape".
6. u can stick label on the surface of the straw or simply insert the label/memo inside the straw.

U can also refer to the "https://www.instructables.com/id/Business-card-Resistor-Storage/"

Have fun.