Drill Dust Collector From an Envelope

You will need a masking tape and an envelope for collecting the dusts from drilling.

Fold the envelope's both sides to make a pouch like shape

Cut 6-8 cm of tape and stick the half of tape on the envelope

Stick the envelope on the wall below the point that you are going to drill.
Mark the point with a nail or screw that your are going to drill.
Put the drills bit on the mark and start drilling.

After the drilling is finished the dust will be collected in the envelope
Remove the envelope and clean the residue with a wet paper towel.
Clean the hole with a vacuum cleaner.
Pour the dust into a trash bag.