Drill Perpendicular

Hi There!

This is my old work. I decided to share this too

Everyday I needed to drill perpendicularly what I did not do well :(

So I did it

Material: beech plank 20 mm (preferably any other material, such as polyamide nylon), iron pad 5 mm and a spray of 6 mm diameter

I will share the drawings but perhaps these measures do not work, the other drill might need another size :(

It should be measured by the details of which is attached to the item.

Then create a drawing whose internal diameter should be equal to the measured drill's detail

In my case, 51 mm ...

It's a simple thing but I've helped :)