Drill Hanger
This is a fun little project you can do with your kids
since we are all home because of Coronavirus. Your kids will learn how to 3D CAD and you will get a workshop organizer.
since we are all home because of Coronavirus. Your kids will learn how to 3D CAD and you will get a workshop organizer.
Supplies
All you need is access to tinker CAD and in the long run, a 3d printer
Get Access to Tinker CAD
If you don't have an Autodesk account sign up for one online. Then you can make a design like mine😁.
Start With Circles
The circle/cylinder is what holds the drill I based all my measurements (Dewalt 20v brushless).Then use a clear cylinder to hollow out the red cylinders.
Cut the Bottom of the Cylinders Off
Make big rectangular box,turn. Turn it clear. Then place it under the cylinders and group them together. Boom! You almost have a drill hanger.
Hangers
Take a thin rectangular prism and make a hole of your preferred size . Then double it and mount it to the bar and circle assembly. Double check your measurements on the whole project.