Dream's Catcher
![Cattura.PNG](/proxy/?url=https://content.instructables.com/F3U/ICNY/IPQM9LNH/F3UICNYIPQM9LNH.png&filename=Cattura.PNG)
Hi everyone!
So last summer I decided to reinvent a t-shirt.
I was obsessed (a bit) with dream catcher, so I turn my old t-shirt into one of them!
Hope you enjoy! ;)
ps: there are both video tutorial and steps
The Video Tutorial Is Here:
![DIY: t-shirt dream catcher](/proxy/?url=https://content.instructables.com/FVY/20LM/IPQM9LPO/FVY20LMIPQM9LPO.jpg&filename=DIY: t-shirt dream catcher)
It is also with subtitles!
So Let's Get Started :)
![1.jpg](/proxy/?url=https://content.instructables.com/FMD/GNQG/IPQM9M1I/FMDGNQGIPQM9M1I.jpg&filename=1.jpg)
If you didn't watch the video or something isn't clear, you can follow these steps ;)
So the first thing you have to do to your t-shirt is making a quite big hole on the back. The diameter depends on your personal taste (anyway a hole that is too small is also more difficult to do!).
The Wire
![2.jpg](/proxy/?url=https://content.instructables.com/FH0/70PV/IPQM9M2K/FH070PVIPQM9M2K.jpg&filename=2.jpg)
![3.jpg](/proxy/?url=https://content.instructables.com/FGL/C20J/IPQM9M36/FGLC20JIPQM9M36.jpg&filename=3.jpg)
![Cattura2.PNG](/proxy/?url=https://content.instructables.com/FX8/3984/IPQM9LO5/FX83984IPQM9LO5.png&filename=Cattura2.PNG)
Once you have sew the hole you can start sewing the wire (as shown in the images).
While you do this add some beads to make it more realistic.
Details
![DIY: t-shirt dream catcher](/proxy/?url=https://content.instructables.com/FXP/5YMS/IPQM9MO5/FXP5YMSIPQM9MO5.jpg&filename=DIY: t-shirt dream catcher)
You can now add all the details you want like the feathers at the bottom and the bead in the middel!
Don't forget to sew a ribbon to define the circle of the dream catcher.
Enjoy :D