Dorm Room Christmas Tree

by laffinm in Circuits > LEDs

2758 Views, 41 Favorites, 0 Comments

Dorm Room Christmas Tree

13, 10:40 AM.jpg

Gather Supplies

13, 10:35 AM.jpg
13, 10:35 AM.jpg
13, 10:35 AM.jpg
13, 10:35 AM.jpg
13, 10:35 AM.jpg
13, 10:35 AM.jpg
You will need:
•Green and red LEDs
•Soldering iron
•9 volt battery
•Switch
•Tweezers
•Solder

Switch

13, 10:35 AM.jpg
Solder one wire from the switch to the negative terminal. Make sure the other end doesn't touch.

LEDs

13, 10:35 AM.jpg
One by one, solder the LED's ground wires to the other end of the switch. Bend the positive wires back and leave them alone.

Arranging

13, 10:35 AM.jpg
13, 10:35 AM.jpg
Solder the lights so that there is three in the bottom, two in the middle and one red on the top.

Positive Wires

13, 10:35 AM.jpg
Connect all the positive wires and solder them directly to the positive terminal. Make sure that wires aren't touching.

Done!

13, 10:35 AM.jpg
Merry Christmas