Door Flat or Theater

I made a door flat that can be used for plays and shows and I made an instructable because I learned a lot and i feel I can help future set designers.

You need about five long pieces of 1 by 4 wood pieces that are bigger than 10 feet for extra woods as well as a couple 2x4 to use as the interior. Make sure you have a table saw, staple gun, glue, and measuring tape.

Plan out exactly what measurements and what you want the door to look like. mine is nine feet tall and four feet wide.

Get wood and cut it to precise measurements found in the supply list of this instructable.

Lay out what it looks like before attaching everything together,

This is the final and most important step, you must have two people so that the wood is perfectly aligned and make sure to glue the sides your attaching then staple.