Don't Cut Me! Plant
How to make a Don't cut me! Plant.
Supplies:
Plant/Flower
Robot Arm
Wires
Alligator Clips
MaKey CaKey
Plywood
Glue Gun
Saw
Scissors
Drill
Cable Zip Ties
Supplies
Supplies:
Plant/Flower
Robot Arm
Wires
Alligator Clips
MaKey CaKey
Plywood
Glue Gun
Saw
Scissors
Drill
Cable Zip Ties
Make a Box Out of Plywood That Will Fit Your Plant and Robot Arm
Just remember to have one side of the box open!
Drill a Hole in the Box for the Wire to Connect to the Plant
Stab the Plant With the Wire
Use the Alligator Clip on the Wire
Then Put Your Robot Arm on the Other Plywood Box
Fasten the Scissors to the Robot Arm With Cable Zip Ties
Connect the Wire to the Scissors
I Recommend to Fasten the Robot Arm and the Wire Just in Case
Then Do the Same With This Wire and an Extra Alligator Clip
Then Connect the Alligator Clips to the MaKey MaKey and Pick a Sound!
When the scissors connect to the plant the sound will come. I recommend screaming sounds!