Dollar Bill Ring Bling

How to create a ring out of a dollar bill, or any other US money, for that matter.

This is a continuation of my money origami series, started here. As with the previous one, massive credit goes to Clay, who put up the idea originally, along with much other money art.

Start with the side that reads "ONE" facing towards you on a flat surface. Like all money origami, a crisp bill will work best.

Flip the bill over, and fold the "white" edges on the top and bottom inward. Crease those folds, and return the bill to its original side.

Fold the bill in half. (You can flip this over to do it, or not. It doesn't matter.). Then fold the bill in half again.

Fold the end of the bill up from the bottom. That "1" will be the center of the ring, and ideally you're trying to center to be even on both sides. The "white" of the bill gets folded under the "1."

Press everything down and crease.

Just to get the shape of the ring, you can bend the folded bill around your finger a few times. It's not necessary to do this, however.

When you're done. place the bill back on a flat surface.

This is one of those steps which is much easier to show than to describe. As seen below, fold the bill upward to create a 45 degree angle. The distance between this angle and the "1" will be the circumference of the ring.

Continue moving that fold under the ring, and back to the other side.

Bring both ends of the bill together to form...a ring. Take the long end, and fold under the "1", tucking the folded end of the "1" under the long end.

Continue bringing the long end underneath the ring, and back around to the top.

Tuck the remaining flap underneath the "1", and press down all creases.

And viola! You have a dollar ring.

*NB: If the ring is too small, as it will be for most men's fingers, there's a simple way to fix this not discussed in the original author's directions. You can skip the part of Step 5, where one wraps the bill around itself. Instead, just make the 45 degree angle fold (the first picture), and proceed to step 6.