Dog Waste Bag Dispenser

Durable dispenser for dog waste bags.

1" PVC slip cap $0.98

1-1/4" PVC male adapter $0.74

1-1/4" PVC cap $0.98

hex nut $0.26

hex bolt $0.22

eye bolt $0.49

Total 3.67

Drill holes in the center of the two caps.

Cut the eye bolt to size and fasten to the female threaded cap. Fasten the longer bolt to the slip cap.

Insert the slip cap with the bolt into the male adapter. Insert a waste bag roll to measure the center of the role. Drill a hole here to dispense the bags.

Dispenser is now ready for the wast bag roll. Insert and screw on the threaded cap. Make any adjustments necessary.

You can sand and paint the unit for aesthetic appeal, but it's ready to use. Let's bag some turds.