Dog Poop Bag Dispenser

I love taking my dog ​​outdoors, playing with other dogs and doing his business, even though the picking up his poop part isn't the most pleasant.

So I decided with scraps that I had at home I wanted to make a bag dispenser and make it more practical when carrying your bags for your needs.

Scraps of cloth

A 15cm zipper

A carabiner for bags

A metal eyelet

basic fabric tools

A Hammer

As a first step we should cut our fabric, but since at home I did not have the tools to put the metal eyelet on the fabric, I went to a friend's workshop and with his tools I placed the eyelet.

When we have the fabric cut, we measure where we want to put the buttonhole, we can place it wherever we want, I decided to put it a little lower than the middle of my square of the fabric.

With the help of a punch we open our hole in the preferred location on the fabric

We place the metal eyelet on the right side of the fabric.

Then, on the other side of the fabric, we place the eyelet washer and then use a hammer to open the eyelet so that it remains stuck to the fabric.

Cut the fabric to the following measurements. I chose two different colors of fabric, one gray and one black, which I cut like this: 4 pieces of fabric measuring 14x11 cm.

I chose the gray color on the outside and the black color as the lining.

Also cut another 12*5 cm rectangle of fabric to place the metal carabiner.

Sew the 15 cm zipper,

place the right side of the zipper against the right side of the gray fabric

and place a stitch at 1 cm, now sew one cm from the seam

Then place the black fabric and also sew at 1cm.

Repeat the step 5 on the other side of the zipper

Join the upper gray fabric with the other gray and sew at the bottom one cm away from the entire edge completely

And the black bottom fabric with the other part of black fabric but we sew this 1 cm from the bottom but when we reach the center we leave a small space without sewing and then turn our fabric over.

We join in the center of the seams with the center of the zipper

Sew the 12*5 fabric cut and fold in half and sew one centimeter apart.

With the help of a pencil and a needle, turn the fabric so that it is face up.

then place the fabric in the middle of the metal carabiner.

Center and place our fabric in half

and Sew on one side of the dispenser

Sew the corners at one cm, And cut the surplus

Turn the fabric around through the space we left unstitched in the black fabric.

and thus we would have a practical and stylish dog bag dispenser ready.

We can place this dispenser on our dog's collar, also on a strap of our bag, even on the jean belt loops.