Dog Leash Tripod Strap

by agnivohneb in Circuits > Apple

3536 Views, 4 Favorites, 0 Comments

Dog Leash Tripod Strap

DSCN0776.JPG
DSCN0785.JPG
I have been trying to find or make a strap for my tripod so it is easy to carry without a bag or holding it in my hand. I was searching through my closet for any rope but I found a dog leash that we didn't use anymore.

This dog leash is about 5 feet long but I would recommend finding something longer maybe 6 - 6 1/2 feet would be best. I also have a big body so for the smaller photographers 5 feet might be ok.

Don't worry if you still use the dog leash, we wont be cutting it.

First Loop

DSCN0782.JPG
DSCN0783.JPG
DSCN0784.JPG
To make the first loop that will go at the base of the tripod

1. place your hand through the handle loop of the leash
2. grab the leash with your hand
3. pull the leash through but not all the way.

Second Loop

DSCN0785.JPG
DSCN0786.JPG
DSCN0788.JPG
DSCN0789.JPG
DSCN0788.JPG
DSCN0788.JPG
DSCN0785.JPG
DSCN0788.JPG
To make the second loop...

1. grab the latch on the leash
2. attach the latch to the leash just below.

Attach to Tripod

DSCN0788.JPG
DSCN0789.JPG
DSCN0790.JPG
DSCN0791.JPG
DSCN0774.JPG
DSCN0773.JPG
To attach the strap to the tripod

1. place the first loop over the bottom
2. pull that loop tight
3. place the second loop over the top, make sure it is under any screws used for adjusting
4. pull that loop tight

Done... Now you can throw it over your shoulder or across your back for easy transport.