Dog Lamp

Hey :),

In this Instructable, I will be making a Dog desk lamp/ Floor lamp/ Head lamp with Multi-color remote controlled R.G.B lamp.

Scrap wood.

Some Screws.

A4 paper.

Color Changing Lamp.

Printer.

Electric Drill.

Jig saw.

Ear protection.

Security glasses.

Dust mask.

Clamps.

Wood glue.

Precision cutter.

Wire Cutter.

Wire stripper.

Electric tape.

- Print the Patterns (I made them with google sketch-up)

-Cut and tape them onto the wooden plates.

-Cut the pieces out using the jigsaw / CNC router / laser cutter..

- Drill out the holes for the joints using the drill ( best if you use a stationary drill ).

- Glue the 2 Middle-body parts.

- Cut out the space needed for the neck joint.

- Drill 2 holes through the body to run the electric cable through it (optional).

take the curvature shape of the lamp and draw it onto the neck end, then cut it out.

Drill a hole in the lamp and neck, a screw them in.

Cut the electric cable, pass it through the body, then rewire and isolate.

Done!