Dog Collar

In this instructable I will show you how to make a paracord dog collar. I hope you enjoy it!

You'll need:
One or two colors of paracord
A lighter
Tape measure
Scissor
Dog tags with key ring
A d-ring
Plastic buckle

Measure out how much paracord you'll need. It's basically one foot for every inch.
Then melt one end of the cords.
Next you need to melt the other ends together.

Now you want to get your buckle and un buckle it.
Your gonna take the flat end of the buckle and string the cord through the top of the buckle.
Now your going to pull the cord through till you get to the middle.
Now you have a loop that your gonna put the cord through and pull tight.

Take the other end of the buckle and string the cord through the bottom.
Now you want to measure that its the right length.

I can't really explain how to tie the knots so just look at the photos

So this is a king cobra. It's the same knot it's just over the first set of knots.

So just measure out how much paracord you had at first.
Now melt all the ends together.

As you continue it'll start to look like this.

This can also be a bracelet you just don't need the d-ring.

Thank you for reading this and I hope it was helpful and that you enjoyed it and please vote on it!