Doctor Who Tardis Key Perception Filter

by mr monoply33 in Circuits > Microcontrollers

10838 Views, 71 Favorites, 0 Comments

Doctor Who Tardis Key Perception Filter

Key.png
In Doctor Who, The last two episodes of series three are a two-part plot. (Available on Netflix, if you're interested) In it we get a good look at the Tardis key, outfitted with a small 8 pin chip and a ceramic capacitor to make a Perception filter. Easy enough prop to replicate.

Supplies

caps.jpg
key.jpg
chip.jpg
There are only three components to this project. A scrap key, an eight pin chip, and a ceramic capacitor. 555 timers a caps are common hobby project parts. These parts can be purchased new from places like Radio Shack and Diji-key, but can be found on scrap boards just as easily. These orange ceramic caps are more commonly found on older boards (as SMTs have widely replaced their Through-hole counterparts) while the chips are more common in newer ones. If you don't have a bin of dead keys, your local hardware store may have a bin of mis-cut keys from which you can choose.

Assemble

finished.jpg
bend.jpg
soldered.jpg
loop.jpg
bigLoop.jpg