Do Nothing Machine

This is a do nothing machine.

Just turn the handle and as the name describes it does nothing.

For this project you will need:

• Fusion 360 (to open the files)
• A 3D printer (to print the parts)
• Filament (for the 3D printer)

First download the files.

Then upload to your 3D printer.

Print!

Then assemble.

Then put the pins through the arm and into the sliding blocks. Attach with superglue(only glue pins to slidings blocks an not to the arm so the arm can spin freely.

Then snap the knob onto the end of the arm.

And... Done

Note: you may need to sand down some of the side of the sliding blocks etc. So they slide freely.