Diy Rgb Led Mailbox

Hi, this is my second instructable

I upgrade my mailbox with some rgb led and here i want to explain how i make it

in the next step there's all the material and the tool used

the last step contain the finished mailbox

If you like my instructable vote In the contest

Materials and Tools

Materials list:

• Strip led rgb 5050 ip65 (the lenght you need)
• rgb led mini controller
• ac to dc 12v power supply
• wood (i used pallet)
• screw
• glue

Tools list:

• screw gun
• drill
• scissors

Let's Do It

Now we have the mailbox on the bench, measure the mailbox from the top to the bottom and cut a piece of wood about the measurement

Screw it to the back of the mailbox and measure the perimeter

Drill a hole in the back of the mailbox to make the wire go through

Cut the led strip of the wood's length and glue it around like the photo

I put the power supply and the controller inside the mailbox

Now you have an awesome mailbox

You can also use single color strip or program the ws2812b strip to make some special effect

I hope you enjoy