Diy Wood Clamp

I've needed a clamp that will not scratch the piece I am working on. I have tried putting a rag in a vise and holding it like that but I thing a softer material is best for the job. Let's make a wood clamp.

Let's gather the following things.

For our materials We will need
two 9" pieces of wood
Two cross nuts
Two bolts


Tools:
Jig saw
Square
Pencil
Tape measure u

Measure 1 inch on the piece of wood and make a mark.now on the top side measure 2 inches and make a line. From the opposite end measure 2 inches and 5 inches.transfer the lines to another face and find the center.

Now we need to drill and saw. Sounds simple but be careful.

With the holes been drilled out now insert the nuts and bolts. And we are done start clamping stuff together.