Diy Wings Pendant

by prernaupd in Craft > Jewelry

557 Views, 5 Favorites, 0 Comments

Diy Wings Pendant

IMG_20200527_101425.jpg
IMG_20200527_101536.jpg
IMG_20200527_085639.jpg
Hey everyone! This time I came with nice angel wings wire wrapped pendants .that you can make easily by yourself. So let's get started.

Supplies

1.Copper wire (0.3mm) 40 cm long
2.a rectangle stone
3.two small beads of different sizes

Wrapping Rectangle Stone in Wire

IMG_20200527_102450.jpg
IMG_20200527_102501.jpg
IMG_20200527_102420.jpg
IMG_20200527_105948.jpg
IMG_20200527_110033.jpg
I used two rectangle pink stone with holes at both end you can use any rectangle crystal or stone or you can also use beads in series.I join them as shown in pic 2 . Then Take wire out of one hole and fold it into two equal half shown in pic 3 . now take one side of wire into other hole. And wrap the wire at both ends the take both wire together at one end of your crystal and stone. and then add first bead to it.

Giving Shape to Wings

IMG_20200527_102242.jpg
IMG_20200527_102213.jpg
IMG_20200527_093057.jpg
IMG_20200527_102111.jpg
IMG_20200527_093300.jpg
IMG_20200527_093304.jpg
IMG_20200527_093438.jpg
First You have to draw wings and then put wire on it and follow the lines after that for feathers shape just make to or three loops when you are done join two wings by twisting the wire. Be careful while twisting because it can change the shape of wings. now add second small bead and make loop at top.

Now You Are Done

IMG_20200527_101457.jpg
IMG_20200527_102035.jpg
Yay! Here your beautiful wings pendant is ready. Now give it nice cord.