Diy Paintball Barrel Shroud

I just made this for my pinball gun and wanted to share it.

- 1-1/4" PVC pipe

- Two rubber bands

- Flat black spray paint (not pictured)

- Your Paintball Gun

First, cut the PVC to the size of the part of the barrel that sticks out.

Spray paint the PVC pice flat black

In my case I have a Smart Parts SP1 with a CP barrel, and so I measured About 6-1/2"

Put the rubber bands acording to the picture.

Then slide in the PVC pipe covering the barrel.

I did this to make my marker look different and give it that "tacticool" look. It just looks awsome.

Planning to make differnt ones in the future.